Carlisle Interconnect Technologies, in a partnership with Saint Gobain Performance Plastics, now offers a complete ARINC 791 solution for Ka- and Ku-band SATCOM installations. The complete package contains everything required for either retrofit or forward fit installations on large jet aircraft. Installation fittings are adjustable to cover the complete range of aircraft frame spacing while providing discrete interface loads to the fuselage. The aerodynamic fairing follows the fuselage curvature without requiring a large installation doubler, sealants, or fasteners through the aircraft skin.

Events related to aircraft missing over oceanic areas have led to several new requirements, amongst which is the introduction of a long-range Underwater Locator Device (ULD).

The ULD low frequency (8.8kHz) technology is used to increase the range at which aircraft submerged wreckage can be located.

It will be mounted on the aircraft structure free of sound absorbent materials and not in wing sections or empennage. The installation is in accordance with ARINC specification 667, which describes the removal, installation and maintenance aspects of an ULD installation.

Note that the ULD is not to be confused with the Underwater Locator Beacons (ULB) as installed on the CVR and FDRs. The ULD is complementary to the ULB and is mounted to the aircraft structure.

ICAO states that by January 1st 2018 aircrafts flying long range over water with a MTOW>27.000 kg must be equipped with an ULD. Long range over water is determined by the exceedance of the distance from a suitable emergency landing spot. The distance corresponds to 120 min at cruise speed or 400NM whichever is the lesser.

EASA states that by January 1st 2019 Passenger aircraft flying long range over water with a MTOW>27.000 kg and cargo aircraft with MTOW > 45.500kg must be equipped with an ULD. Long range over water is determined by a distance >180 NM from shore.

CARS 121 MOS 11.64 states that aircraft with a MTOW>27.000 kg carrying a life raft should have an ULD by December 2, 2023.

Other authorities have accepted similar rules.

Contact Fokker Services for other aircaft types.

LED Sealed Beam Replacement Lamps from Talon

Get Light-Years ahead of your competition!

Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.

Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.

Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.

The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

FAA:  ST03700NYEASA: 10046185FAA STC EFB 737 ST03939NY

Fokker Services has joined forces with Navtech, Jepessen and Dynamicsource AB, leading providers of flight operations solutions, and developed an EFB solution for iPad® installation that may revolutionize the way we navigate our skies. Technology moves quickly, and at Fokker Services it is our policy to stay ahead of the game. We design and launch more than 300 aircraft modifications every year, believing that even an already functioning product can be improved on. In recent years Apple has captured the hearts of the consumer with their innovative thinking, whilst Navtech represent quality and credibility within the aviation industry. Combined with the history and experience at Fokker, the development of such an innovative yet simple solution felt like a natural progression. Service providers today are under a lot of pressure to meet growing demands. Products must be efficient, safe, cost effective, user and environmentally friendly; Our EFB installation is ticking all the boxes and is available for most aircraft types, including Airbus, Boeing, ATR, Bombardier Challenger & CRJ Family, Embraer, Fokker and others. 

Over 1300 installations and upgrades have been ordered

Dual transponder system ADS-B upgrade in Part 25 aircraft

The 1st FAA Certified LED Anti-Collision Light for Commercial Aircraft

Dependability, Weight Savings and Inventory Reduction

The Talon Aerospace anti-collision centerline/fuselage strobe light is designed to replace all incandescent based centerline lights installed on Boeing, Airbus, McDonnell/Douglas, Embraer, Bombardier and other regional aircraft. 

During retrofit the operator will purchase an install kit, which includes an adaptor and harness assembly. On airframes that have accessibility provisions inside the interior the upper centerline light allows removal from inside the cabin. The harness and adaptor will last the lifetime of the airframe. 

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

Talon Aerospace anti-collision wing and tail strobe lights are designed to replace all incandescent based strobe lights installed on Boeing, Airbus, McDonnell/Douglas, Embraer, Bombardier and other regional aircraftt.

During retrofit the operator will purchase an install kit, which includes an adaptor and harness assembly. The harness and adaptor will last the lifetime of the airframe. There are 3 basic LED strobe designs and all operate with a common Talon LED power supply unit.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

• Self-contained, portable, protective breathing device  designed to safeguard aircraft crewmembers from emergencies and assist the evacuation of passengers.
• Fire, Evacuation, Rescue, Smoke-filled Cabins,Toxic Fumes, Hazardous Cargo Spills, Decompressions

Proponent, authorized distributor.

• Proponent provides full authorized distribution and customized availability services for worldwide airlines and MRO's. 
• Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers. 

Notice Of Proposed Rulemaking (Nprm) 

• https://www.federalregister.gov/articles/2015/06/16/2015-14286/airworthiness-directives-be-aerospace-protective-breathing-equipment-part-number-119003-11
• Smoke Hood 119003-11

Essex is providing alternative technology!

• The Essex PBE offfers an alternative technology (compressed air).
• This technology has been recently adapted by airlines replacing their chemical oxygen generators.

Automatic External Defibrillators (AED) are becoming more and more commonly available in our daily life.

Recognized national health institutes in several countries currently advises these AED.

As a result of this, operators are requested by these health institutes to install this AED equipment on board of the aircraft.

Further AMC1 CAT.IDE.A.220 (b) (4) was issued with additional guidance, which is further detailed in FAQ n.19169, issued by EASA (https://www.easa.europa.eu/faq/19169)

Although the AED units are widely spread for civil use, DOA 160 certification for aerospace use is sometimes difficult to prove.

Fokker Services has successfully completed EMC verification testing on the Fokker 50 and Fokker 70/100 aircraft as well on a Embraer 170/190 and DeHavilland Dash-8 aircraft with the following commercially available model AED:

Philips Heartstart FRx 861304

www.medical.philips.com

Heartsine Samaritan PAD 350

www.heartsine.com

New european rule making will be come applicable:

•EASA HalonGuide Nov 2019

•EU: Regulation (EC) No 1005/2009

•EU: Commission Regulation (EU) No 2017/605

and will prohibit the use of Halon file units per 1 Jan 2025.