LED Sealed Beam Replacement Lamps from Talon

Get Light-Years ahead of your competition!

Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.

Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.

Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.

The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

The Traffic alert and Collision Avoidance System (TCAS) has been introduced in order to reduce the risk of mid-air collisions or near mid-air collisions between aircraft. When TCAS II version 7.1 is implemented the probability of mid-air collisions will be reduced significantly. *

The introduction of TCAS change 7.1 software is available for Fokker 50, Fokker 70 and Fokker 100 aircraft as well as for other types of aircraft like Airbus A318, A319, A320, A321, Boeing 737 series, 757, 767,  Bombardier Dash 8 and CRJ. (* source: www.eurocontrol.int)

The cabin interior of your aircraft is one of the first passenger impressions. A modern, clean and bright interior stimulates a feeling of well-being and adds to the overall comfort and satisfaction of your customers. Fokker Services offers several modifications to enhance the quality and atmosphere of the passenger cabin. The cabin solutions are available for Fokker aircraft and other types of aircraft.  

The Honeywell TRA 45A combines terrain display and radio altitude information into a single, space-saving multifunction instrument. The TRA-45A is designed to work with Honeywell's enhanced ground proximity warning systems (EGPWS). It’s lightweight and small size conserves scarce instrument panel space. The display is a colour active-matrix liquid crystal display (AMLCD).

Installation of a Rockwell Collins Dual ADF-60A Automatic Direction Finding System (ADF) onto a Fokker F27-200 aircraft

Installation of Grimes Floor Proximity lighting system, P/N 10-1309-43, P/N 10-1039-81, or P/N 10-1309-83 in Fokker 27 MARK 200 airplanes and P/N10-1309-41 or P/N 10-1309-59 in Fokker F.27 Mark 500 airplanes and P/N 10-1309-149 in F.27 Mark 600 airplanes.

Modification of a Collins ALT-50A or ALT-55B Radio Altimeter system installation to a Collins ALT-1000 or ALT-4000 Radio Altimeter system installation in accordance with Collins Drawing Index as listed on AML No. ST01305WI-D, Revision -, or later FAA approved revision.

Modification of a single or dual Collins TDR-94 or TDR-94D Mode S Transponder System installation with CTL-92 control head to a Flight ID capable Collins TDR-94 or TDR-94D Mode S Transponder System installation with CTL-92E control head.

Modification of Collins VHF-22A/VHF-22B VHF COMM Receiver Transmitter with CTL-22 Control Pro Line II System Installation to a Collins VHF-22C/VHF-22D VHF COMM Receiver Transmitter with CTL-22C Control 8.33 kHz Pro Line II System installation.

Modification of Collins 618M-4 VHF COMM Receiver Transmitter Installation to a 618M-5 VHF COMM Receiver Transmitter installation with either a Gables G7406-02 or Avtech 7522-1-2 VHF COMM Receiver Transmitter Control Series using with Collins Installation Instructions as listed on AML No. ST00525WI-D, or later FAA approved revisions.