Modifications (13)

ADS-B Out upgrade – Textron Cessna 525 Series

QCM design provides the EASA STC for the ADS-B Out upgrade on the Textron Cessna 525 series.

This STC provides operators with a cost effective and easily installed solution to meet the upcoming ADS-B Out mandate in 2020.

View details

ADS-B Out upgrade – Hawker 1000 Series

QCM design provides the EASA STC for the ADS-B Out upgrade on the Hawker Series aircraft type (Hawker 1000).

This STC provides operators with a cost effective and easily installed solution to meet the upcoming ADS-B Out mandate in 2020.

View details

External LED Landing, Taxi, and Navigation lights – Challenger 604/605

QCM design provides the EASA STC for the replacement of the existing halogen landing, taxi, and navigation lights with LED lights in order to reduce maintenance costs, and because of the longer life cycle attributed to LEDs.

This STC provides operators with a cost-effective solution to upgrade from halogen lamps to LED lights for their aircraft.

QCM design provides the EASA STC for the replacement of the existing halogen landing, taxi, and navigation lights with LED lights in order to reduce maintenance costs, and because of the longer life cycle attributed to LEDs.

This STC provides operators with a cost-effective solution to upgrade from halogen lamps to LED lights for their aircraft.

View details

16G Seats Refurbishment – Bombardier Global Express

QCM design provides the EASA STC for the refurbishment of 16G passenger seating, including changes to the foam cushion dimensions and shaping, as well as the reupholstery of the seat dress covers.

View details

External Cargo Hook Release Modification – Airbus Helicopter AS350 / EC130

QCM design provides the EASA STC for the installation of a switch to allow the pilot flying the AS350B3e the option of being able to select either the existing ‘upper’ hook or ‘lower’ hook for release during an operation.

This STC provides the assurance the ease of load release during operation throughout any phase of flight.

View details

Honeywell CNX-900 router installation - WiFi&3G - Bombardier Global Express

QCM design provides the EASA STC for the Honeywell CNX-900 router installation on the Bombardier Global Express.

This STC provides operators with Airborne wireless internet access (WiFi) and 3G connectivity on ground. The Honeywell CNX-900 router is interfaced with both the Ku band system and Satcom system.

View details

Delta Certification of a GPS/WAAS Sensor & Antenna Installation for...

Delta Certification of a GPS/WAAS Sensor & Antenna Installation for thesupport of the Approved EASA STC 10058529.

View details

P-RNAV Airworthiness Approval,,P-RNAV airworthiness approval based on the existing aircraft...

P-RNAV Airworthiness Approval,,P-RNAV airworthiness approval based on the existing aircraft avionicsequipment in compliance to JAA TGL 10 rev. 1 was shown.RNAV 1 compliance was shown against ICAO PBN Manual DOC 9613, TableII-B-3-2.,,

View details

Upgrade of Dual Honeywell Control Display UnitsExisting two(2) Honeywell Flight...

Upgrade of Dual Honeywell Control Display UnitsExisting two(2) Honeywell Flight Management System Control DisplayUnits(CD-820) are replaced with updated touchscreen technology units(CD-830)

View details