Reconfiguration of a Cabin Floorplan Arrangement Certification Basis The Certification...
Overview
Introduction
Reconfiguration of a Cabin Floorplan Arrangement Certification Basis The Certification Basis for the original product remains applicable tothis certificate/ approval.The requirements for environmental protection and the associatedcertificated noiseand/ or emissions levels of the original product areunchanged and remain applicable to this certificate/ approval. Limitations -FAA STC ST03038CH-D issued 19th December 2011-Installationin accordance with Standard Aero Master Data List - MDL1021004, Revision H, dated 19th December 2011or later revisions of the above listed documents approved by EASA inaccordance with EASA E (...) Conditions 1. The installer must determine whether this design change is compatiblewith previously approved modifications.2. If the holder agrees to permit another person to use this certificateto alter the product, the holder shall give the other person writt (...)
Your needs
.
Your benefits
Certification Services
As an alternative to FAA-direct certification services, StandardAero can deliver considerably shorter STC certification times that can ultimately reduce downtime.
StandardAero’s Organization Designation Authorization (ODA – Certification number ODA-100079-CE) allows us to perform certification work for customers in approved facilities anywhere around the world. Our extensive STC library is a culmination of certification projects we have completed since 1974.
In addition to many engine, airframe and avionics modifications already in place, we have STCs for partial and full interiors including fully functional galleys, passenger seating changes, new lavatories, cabinets, oxygen systems, potable water, waste water, 120VAC/60Hz
electrical supply/distribution and much more.
Product Description
Reconfiguration of a Cabin Floorplan
Arrangement
Certification Basis
The Certification Basis for the original product remains applicable tothis certificate/approval. The requirements for environmental protection and the associatedcertificated noiseand/ or emissions levels of the original product areunchanged and remain applicable to this certificate/ approval.
Limitations
-FAA STC ST03038CH-D issued 19th December 2011
-Installationin accordance with Standard Aero Master Data List
- MDL1021004, Revision H, dated 19th December 2011or later revisions of the above
listed documents approved by EASA inaccordance with EASA E (...)
Conditions
1. The installer must determine whether this design change is compatiblewith previously approved modifications.
2. If the holder agrees to permit another person to use this certificateto alter the product, the holder shall
give the other person writt (...)
Please contact modification supplier for further details.
STC Status: Revision Level: REV. 2
STC Date: 05/09/12
Responsible Office: EASA
Your benefits
Certification Services
As an alternative to FAA-direct certification services, StandardAero can deliver considerably shorter STC certification times that can ultimately reduce downtime.
StandardAero’s Organization Designation Authorization (ODA – Certification number ODA-100079-CE) allows us to perform certification work for customers in approved facilities anywhere around the world. Our extensive STC library is a culmination of certification projects we have completed since 1974.
In addition to many engine, airframe and avionics modifications already in place, we have STCs for partial and full interiors including fully functional galleys, passenger seating changes, new lavatories, cabinets, oxygen systems, potable water, waste water, 120VAC/60Hz
electrical supply/distribution and much more.