SINGLE OR DUAL ARINC 743A GPS ANTENNA AND COAXIAL CABLE INSTALLATION

Photos

Photo 1 of 2
Where to buy

Sign up and get a customized experience

.

Overview

STC Number

Introduction

STC ST01060CH installs single or dual GPS antenna provisions, ARINC 743A GPS antennas
and coaxial cables on 737-200/-300/-400/-500 series aircraft.   Please contact the factory for a complete list of available configurations and details of the kit content.

Your needs

This STC can be used to support any modification or existing system that requires an independent position source.  This STC supports the installation of an ARINC 743A GPS antenna.  Any ARINC 743A GPS antenna not supported by the STC can be added via a minor change to the STC.

Your benefits

Carlisle Interconnect Technologies (CarlisleIT) offers a turnkey solution to the installation of a GPS antenna.  We provide all engineering and maintenance data required by the STC.  Additionally, CarlisleIT can provide an installation kit providing all the materials necessary for the installation.

Product description

MODELS

  • 737-200 Series
  • 737-300 Series
  • 737-400 Series
  • 737-500 Series

APPROVALS

  • FAA STC: ST01060CH
  • UKRAINE STC:                                                                      
  • BRAZIL STC: 2010S02-06
  • FRENCH STC: IM135-SI-0667
  • ARGENTINA STC: CTS 0604.18(A)
  • SPAIN STC: S344-I

 

ENVIRONMENTAL APPROVALS

Antennas to be installed need to have TSO or PMA approval.  CarlisleIT can provide a list of current eligible antennas.

 

FLAMMABILITY

The coaxial cables are approved for flammability per 14 CFR 25.869(a)(4) Amdt 25-113 and Appendix F Part 1 (a)(3).

 

OPERATION

N/A

 

INSTALLATION

Installation time is approximately 8 MHrs for the antenna provisions and 16 MHrs for the coaxial cable installation.  CarlisleIT can provide a turnkey installation kit providing all the materials required for the installation.

 

DURABILITY

All installed components do not require any regular maintenance.  The STC modifies Fatigue Critical Baseline Structure (FCBS).  Inspections intervals and procedures are provided in the Instructions for Continued Airworthiness (ICA).  Inspection intervals are generally on the order of 10,000 cycles and are primarily dependent on the 737 model being modified.  

 

CLEANING

No special cleaning requirements. 

 

POWER

No power required. 

 

LAYOUT AND DIMENSIONS

For each applicable aircraft series (737-300, 737-400, 737-500), there are two installation configurations based on aircraft line number.  For the earlier series aircraft, the provisions installation includes an external doubler that spans stringers S-2L, S-1, S-2R, and provides provisions for mounting two side-by-side GPS antennas.  For later series aircraft, Boeing has provided a skin “pad-up” area to install the antenna.  The typical structural provisions installation for these aircraft includes an internal antenna retainer.  Both configurations are depicted above.

Your benefits

Carlisle Interconnect Technologies (CarlisleIT) offers a turnkey solution to the installation of a GPS antenna.  We provide all engineering and maintenance data required by the STC.  Additionally, CarlisleIT can provide an installation kit providing all the materials necessary for the installation.

Boeing 737 Classic € RFQ

Get availability / details on this Modification from supplier*

Join the Modifications Trading Place

  • Boeing 737 LED Lighting Modification

  • Electronic Flight Bag (EFB) on the iPad

  • New ACRO Seats offering significant cost savings

The Benefits
For ModStore Sellers
  • Marketing Exposure
  • Generate New Leads
  • Increase Sales
For ModStore Buyers
  • News Updates
  • Participation
  • Posting Requests