LED Sealed Beam Replacement Lamps from Talon

Get Light-Years ahead of your competition!

Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.

Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.

Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.

The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

Wireless Data Loader Installation

Dual transponder system ADS-B upgrade in Part 25 aircraft

Cabin Refurbishment (including Veneer repair, varnishing, new carpet and panel-recovering)

DFS MOD 7082A : Falcon 7X with M1000 - S/N 405 Cabin seats replacement.

This AML STC allows the installation of Cargo Bags on 3‐place divans.The cargo bags are designed for carrying passengerluggage such assports equipment. The transport of dangerousgoods is excluded. Refer toApproved Model List JBSL‐M‐01014AML‐01 for applicable types and models.

Validation of FAA STC ST03591NY.Installation of Honeywell JetWave System. FAA STC ST03591NY

Cabin 14 Pax ConfigurationReplacement of existing cabin single seats by new ones and increase ofmaximum PAX configuration from 12 to 14.

LH Galley Bulkhead installation and aircraft curtains modification.

GSM & Wi-Fi IntegrationNew installed equipment:- TriaGnoSys, 21T810-XX-01-00 AEROBOTS+ (GSM Base Transceiver Station,BTS)- TriaGnoSys, 21T820-00-01-00 NCU (Network Control Unit)- VT Miltope, 902693-1 nMAP (Cabin Network Router)- Mobile Mark, RMM-UMB-Q4-AB GSM/WIFI TX Antenna- Mobile Mark, RMM-UMB-Q4...