Exterior markings per Drawing List 355A82-1708, Rev C, dated 8/27/81 or later FAA approved revision.
Validation of STC SH96-126 “Blade Tie Down provisions kit”,TCCAapprovedThis STC revision 02 is issued to validate the eligibility extension ofBLADE TIE-DOWN PROVISIONS KIT as defined in Master Drawing ListMDL-96-012 Rev I, to EC130 T2 helicopters. TCCA SH96-126
Structural provisions for WESCAM low profile bracket installation(high) and 24-inch or 16-inch WESCAM sensor installation.
Replacement of the original landing gear skid tubes.
The installation of WESCAM Low Profile Bracket Installation (HIGH) and 24”, 16” or 12” WESCAM Sensor Installation-Structural Provisions Only
MX-15 camera installation (structural provisions only).Note: The revision extends the applicability of STC EASA.IM.R.S.01230 to AS355N. EASA.IM.R.S.01230 TCCA STC SH04-29
Installation of MX-15 Camera Installation (Structural Provisions only).
Installation of Honeywell Mark 22 Enhanced Ground Proximity Warning System in accordance with Drawing No. DL355018, Revision B, dated February 5, 2005, or later FAA approved revision. Instructions for Continued Airworthiness Report Number MMS/355018-001, dated April 20, 2005 or later FAA accepted revision are required.
MX-Series Camera Installation (Structural Provisions Only) EASA.IM.R.S.01517 TCCA STC SH97-31