Carlisle Interconnect Technologies, in a partnership with Saint Gobain Performance Plastics, now offers a complete ARINC 791 solution for Ka- and Ku-band SATCOM installations. The complete package contains everything required for either retrofit or forward fit installations on large jet aircraft. Installation fittings are adjustable to cover the complete range of aircraft frame spacing while providing discrete interface loads to the fuselage. The aerodynamic fairing follows the fuselage curvature without requiring a large installation doubler, sealants, or fasteners through the aircraft skin.

Events related to aircraft missing over oceanic areas have led to several new requirements, amongst which is the introduction of a long-range Underwater Locator Device (ULD).

The ULD low frequency (8.8kHz) technology is used to increase the range at which aircraft submerged wreckage can be located.

It will be mounted on the aircraft structure free of sound absorbent materials and not in wing sections or empennage. The installation is in accordance with ARINC specification 667, which describes the removal, installation and maintenance aspects of an ULD installation.

Note that the ULD is not to be confused with the Underwater Locator Beacons (ULB) as installed on the CVR and FDRs. The ULD is complementary to the ULB and is mounted to the aircraft structure.

ICAO states that by January 1st 2018 aircrafts flying long range over water with a MTOW>27.000 kg must be equipped with an ULD. Long range over water is determined by the exceedance of the distance from a suitable emergency landing spot. The distance corresponds to 120 min at cruise speed or 400NM whichever is the lesser.

EASA states that by January 1st 2019 Passenger aircraft flying long range over water with a MTOW>27.000 kg and cargo aircraft with MTOW > 45.500kg must be equipped with an ULD. Long range over water is determined by a distance >180 NM from shore.

CARS 121 MOS 11.64 states that aircraft with a MTOW>27.000 kg carrying a life raft should have an ULD by December 2, 2023.

Other authorities have accepted similar rules.

Contact Fokker Services for other aircaft types.

ADS-B Out signal is used for surveillance purposes on the ground or onboard other aircraft in order to facilitate airborne traffic. 

ADS-B, standing for “Automatic Dependant Surveillance – Broadcast”, is the replacement and augmentation of radar-based aircraft surveillance systems. With ADS-B, the surveillance of aircraft does no longer rely on radar ground stations, but on airborne GPS receivers. Aircraft equipped with ADS-B broadcast their precise position and velocity data, as well as altitude and supportive information automatically, without pilot input, to ATC on ground (ADS-B Out) or to other aircraft (ADS-B In).

LED Sealed Beam Replacement Lamps from Talon

Get Light-Years ahead of your competition!

Talon Aerospace sealed beam replacement lamps are designed to allow for plug and play replacement of the existing sealed beam lamps fitted on an aircraft. Talon has 3 sizes available, with replacements for the Par 64 landing, Par 46 taxi and Par 36 logo, runway turn-off, engine and wing scan applications. The existing sealed beam lamps have a design life span between 25 and 300 hours while the Talon LED replacements are designed for 20,000 in service hours.

Light output is comparable to OEM lamps and the Par 64 landing light and Par 46 taxi light are designed to meet Mil Spec standard MIL-L-6503H. The LED replacements work with the existing transformers on the aircraft and are designed to minimize the overall LRU count within an operator inventory. The LED replacement lamps are designed with cool white LEDs to maximize light output but the Par 36 logo is also made available in warm white. Par 36 LED replacement lamps operate on both 13V and 26V AC, while the Par 46 and 64 operate on 26 VAC. All lamps can also operate on 28VDC, allowing for rotorcraft applications.

Talon LED sealed beam are designed at comparable weight to existing sealed beam lamps of equal size, allowing them to be used in existing fixtures. The current draw for the LED lamp is significantly lower compared to the existing units. Landing light Q4559X draws 650W while Talon LED replacement TAE0728-1 draws only 104W.

The LED replacement lamps are fully repairable and operator can replace individual components like the LED board, power supply and lens in case of failures, reducing cost of ownership.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

Talon Aerospace LED logo light Assemblies to replace Halogen  replacement.

Do you recognize the following problems with your existing logo lights?

• Halogen bulbs are replaced frequently
• Lights are installed in difficult to reach areas and requires use of cherrypicker or lift
• Lens sealant does not have sufficient time to dry, leading to moisture ingress within horizontal stabilizer
• Transformer requires frequent replacement
• Incandescent bulb color temperature changes appearance of corporate logo

Get Light-Years ahead of your competition!

Talon Aerospace LED logo light assemblies are designed to allow for plug and play replacement for the existing HLX64621 halogen bulb based logo lights. Talon uses a rack to replace the OEM logo light housing. The LED module and transformer assembly are mounted to the rack. The OEM aircraft connector is mounted on the transformer assembly, making the LED logo light assembly plug and play.

The lens, lens gasket and hardware can be retained from the OEM unit, but Talon does make replacement lenses available for most applications. The Talon logo light assemblies operate on 115VAC 400Hz aircraft power. A transformer within the assembly steps the voltage down to 14V to power the LED module. All internal connectors are circular mil-spec connectors.

 Approved Model List:

 Planned for Approval:

• Embraer Embraer E170, Embraer E175, Embraer E190, Embraer E195

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products.
This relation provides customers with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

FAA:  ST03700NYEASA: 10046185FAA STC EFB 737 ST03939NY

Fokker Services has joined forces with Navtech, Jepessen and Dynamicsource AB, leading providers of flight operations solutions, and developed an EFB solution for iPad® installation that may revolutionize the way we navigate our skies. Technology moves quickly, and at Fokker Services it is our policy to stay ahead of the game. We design and launch more than 300 aircraft modifications every year, believing that even an already functioning product can be improved on. In recent years Apple has captured the hearts of the consumer with their innovative thinking, whilst Navtech represent quality and credibility within the aviation industry. Combined with the history and experience at Fokker, the development of such an innovative yet simple solution felt like a natural progression. Service providers today are under a lot of pressure to meet growing demands. Products must be efficient, safe, cost effective, user and environmentally friendly; Our EFB installation is ticking all the boxes and is available for most aircraft types, including Airbus, Boeing, ATR, Bombardier Challenger & CRJ Family, Embraer, Fokker and others. 

Over 1300 installations and upgrades have been ordered

The growth of aircraft systems operated by onboard loadable software and the extinction of 3,5” Floppy-Disks make common Airborne Data Loaders (ADL) / Multipurpose Disk Drive Units (MDDU) more and more inconvenient.

Lufthansa Technik (LHT) provides a plug and play Data Loader Connector Panel (DLP) for easy connection of any ARINC 615 Standard Portable Data Loader (PDL). Software Upload effort can be reduced remarkably with a modern Portable Data Loader connected to the Data Loader Connector Panel.

The 1st FAA Certified LED Anti-Collision Light for Commercial Aircraft

Dependability, Weight Savings and Inventory Reduction

The Talon Aerospace anti-collision centerline/fuselage strobe light is designed to replace all incandescent based centerline lights installed on Boeing, Airbus, McDonnell/Douglas, Embraer, Bombardier and other regional aircraft. 

During retrofit the operator will purchase an install kit, which includes an adaptor and harness assembly. On airframes that have accessibility provisions inside the interior the upper centerline light allows removal from inside the cabin. The harness and adaptor will last the lifetime of the airframe. 

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers with the latest generation of LED lights.

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

LED Forward Navigation and Position Lights

Talon Aerospace LED Forward Navigation and Position Lights are designed to allow for plug and play replacement of the existing OEM LED and incandecsent lights fitted on A320, A330 and A340 series aircraft.

The LED Forward Navigation Lights are designed to remain on wing in excess of five years. During the first C Check after five years of operation the LED lights are removed to replace the LED board and gaskets for fresh service life.

The LED Forward Navigation Lights are fully repairable and come with a 5 year warranty.

Talon and Proponent

Proponent is the exclusive global distributor of all Talon Aerospace products. This relation provides customers

with the latest generation of LED lights.

Proponent

Proponent is the new identity representing Kapco Global and Avio-Diepen as one united company, and the unique capabilities that the new organization brings to the aerospace market. With extensive experience in supporting the MRO, OEM and airline markets, our organization offers innovative inventory and supply chain management solutions to OEM and aftermarket customers.

Tailwind 550/560 antenna installation

Installation of an antenna and radome located top of fuselage.